Request info

Product Data Sheet

E-59 Remover, Slow Drying

Type: I, II
Method: C
Class:  2 - Non Halogenated
Dry Rate:  Slow

• It is a slow dry rate material and is ideal for penetrant wipe removal and is not used as a pre-inspection surface cleaner. As a penetrant remover it is sprayed onto wiping media and then the penetrant wiped from the surface.
• The remover should not be sprayed directly on to the test surface to remove the excess penetrant as the sensitivity will be impaired.
• Contains combustible solvents and should not be used around open flames or sparks.

​Size (Item #):

• 12 x 16oz Cans  (E59AER)​​

COMPLIANCE

Certified to SAE AMS 2644 and on the Qualified Parts List.

​Approvals: AMS-2647, ASTM E-165, ASTM E-1417, NAVSEA, ISO- 3452, ASME Boiler and Pressure Vessel Code Section V for penetrant inspection materials. It is low in Sulfur, Chlorine, Fluorine and other Halogens, making it safe for use on Titanium and high Nickel alloys found in aerospace, medical and nuclear components.