|
|
|
SKC-S is an NDT-approved solvent cleaner/remover for pre-cleaning before non-destructive testing and for removing excess surface penetrant from an inspection area before applying developer during liquid penetrant testing.
This non-halogenated solvent remover can be used on a wide range of substrates to remove oils, greases and other contaminants. SKC-S dries quickly without leaving a residue, and meets the low-residue requirements for NDT and aerospace penetrant testing. |
Maximize range of inspections
Features
- Inspect a wide range of components without worry
- Conforms to AMS 2644 Class 2, ASME BPVC and all major aerospace requirements
- Use a single cleaner throughout the entire penetrant testing process
- Comes in both bulk and aerosol forms, or as part of a kit for convenience
- Inspect reliably by cleaning only the surface without flushing penetrant out of discontinuities
- Dries quickly without leaving residue to prevent false indications
Features
- AMS 2644 Class 2 nonhalogenated remover
- Fast drying
- Leaves no residue
- Suitable for use at low temperatures
- Alloy compatibility
- Bulk or aerosol form
- Doesn’t over clean
Standards: AECL, AMS 2644, ASME BPVC, ASTM E1417, Boeing BAC 5423 PSD 6-46 or 8-4, Boeing PS-21202, General Electric P50YP107, ISO 3452-2, NAVSEA 250-1500-1, NAVSEA T9074-AS-GIB-010/271
- Aerosol can, case of 12 - Item # 01-5750-78 (Click here to buy instantly from the MPM Quick Shop)
- 1 gal/3.78 L, case of 4 - Item 01-5750-35
- 5 gal / 18.9 L pail - Item # 01-5750-40
- 55 gal/208 L drum - Item # 01-5750-45
Ideal Application: Non-destructive testing pre-cleaning, Post inspection cleaning, Removing excess surface penetrant
- NDT Type: Fluorescent Penetrant Testing, Visible Penetrant Testing