Radiation Detection Instrument Calibration Service
MPM Products offers an elite calibration program for all of your radiation detection equipment. We offer 24-48 hour turnaround time on most calibrations, with all calibrations being traceable to NIST. We are licensed by the State of Texas Department of Health, License No. L00967 and the State of California Department of Public Health, License No. 8107-30 to perform calibrations. Our calibration system conforms to the requirements of MIL-STD-45662, ANSI N323-1978, & ANSI/NCSL Z540-1. Our calibration facilities are state of the art and our personnel have over 30 years experience.
We also repair most types of radiation detection equipment utilizing factory repair parts and procedures. Our repair departments stock a large quantity of the most common and some uncommon repair parts, so that down time for a repair is minimal.
Standard calibrations are performed utilizing a Cs-137 (Cesium) source, we also perform calibrations to other standards, as well as low energy calibration 10-150 kV. We can also perform counting efficiencies for detectors upon request utilizing several different isotopes including but not limited to Co-57, Co-60, I-129, & Sy-90.
Depending on whether your instrument is a survey instrument for industrial radiography or a count rate meter utilized for contamination or dose counts, rest assured that the calibration performed on your instrument by MPM Products is accurate and precise.
MPM Products is licensed by the State of Texas (License No. LO0967) to provide the service of annual leak testing service for our customers. Our state of the art equipment is designed to provide reliable and accurate results for leak test analysis of Radioactive Isotopes. We will provide a "Leak Test Kit" to our customer, the customer will perform the leak test in accordance to the directions listed on the kit. Once the test has been performed the "Leak Test Kit" will be returned to our facility for analysis, once the analysis is complete a certificate containing the results of the analysis will be sent back to the customer for their records.
In addition to instrument repairs on radiation detection devices, MPM Products is an authorized service center for Magnaflux small instruments, such as UV lights and yokes.