Magnaflux > Mag Particle Inspection > MT Equipment > M-Series

Request info

M-Series
Mobile Power Packs Electromagnetic Current Generators for AC or HWDC Magnetization

The M-Series mobile power pack portable current generators facilitate testing of large and abnormally heavy parts with magnetic particle inspection.

Magnaflux understands some parts cannot be moved so the magnetizing station needs to be brought to the part. The M-Series offers a solution by providing an adaptable mobile unit. These units feature AC or Half Wave DC output.
​
M-Series magnetic power packs are available in three configurations: M-2030, M-2040 and M-2060. Click on the tabs below for more details on these configurations.

Benefits

• Ability to easily move the unit to the part for inspection
• Convenient hook on back side of unit to wrap cables after use, saves space as well as keeps cables lasting longer without being dragged along the floor when moved
• Can add-on a 15 ft / 4.5 m remote control cable for energizing from a distance (part no. 622124)

Interior

• Thermal Overload for circuitry protection
• PLC Circuitry for extra reliability
• Secondary Current Control
• Flow through cooling for heat dissipation
• Solid State Switching (AC to HWDC)

Exterior

• Digital Meter Display
• Two Bus Bars for Connection
• Push button Switch for AC output
• Push button Switch for HWDC output
• Push button Switch for Mag - Momentary–magnetizes as long as button is pushed
• Push button Switch for Demag - One touch auto cycle and switches to decaying AC automatically
• Push button Switch for power on/off
• Push button Switch for pulse - 1.5 sec on, 3 sec off for 30 sec
• Infinitely variable current control
• Two (2) fixed heavy-duty casters
• Two (2) swivel casters with locks
• Lift hooks for extra unit mobility
• 115 Volt Convenience Outlet (10 amp)

• M-2030
• M-2040
• M-2060
• Comparison

<

>

Specifications

• Output: 3,000 amps AC and HWDC magnetizing current
• Output rated with 90’ total of 4/0 cable
• Dimensions: 46” L x 23” W x 39” H
• Weight: 780 lbs.
• Available Voltages: 380, 415, 460, 575, 50 or 60 hertz, single phase power
• 7% Duty Cycle (maximum output with 1/2 minute ON time)

M-2030 for long cable output is designed for applications in which the power source cannot be close to the inspection piece. This unit designed to work with long cable lengths necessary for inspecting large parts (i.e. power generator parts).

M-2030 Data Sheet

Specifications

• Output: 4,000 amps AC and HWDC magnetizing current
• Output rated with 30’ of 4/0 cable
• Dimensions: 46” L x 23” W x 39” H
• Weight: 780 lbs.
• Available Voltages: 230, 380, 415, 460, 575, 50 or 60 hertz, single phase power
• 7% Duty Cycle (maximum output with 1/2 minute ON time)

M-2040 Product Sheet

Specifications

• Output: 6,000 amps AC and HWDC magnetizing current
• Output rated with two 30’ of 4/0 cables ran in parallel
• Dimensions: 46” L x 23” W x 39” H
• Weight: 780 lbs.
• Available Voltages: 380, 415, 460, 575, 50 or 60 hertz, single phase power
• 7% Duty Cycle (maximum output with 1/2 minute ON time)

M-2060