Non-Interleaved (NIF)
|
|
|
Folder Wrapped (FW)
|
|
|
Pb VACUPAC
|
|
|
Pb ETE (Edge-To-Edge)
|
|
DW ETE (Edge-To-Edge)
|
|
|
Bulk Load Roll (BLR)
|
|
|
ROLLPAC
|
|
|
Pb ROLLPAC
|
|
|
Darkroom Packaging
|
Non-Interleaved Films (NIF)This is the most economical way to buy sheet film. The intrinsic film quality is the same as that of pre-packed film. Sheets of film are packed per 100 (except extremely large sizes) in a paalpo bag insdie a cardboard box. The paalpo bags allow for easy film removal and re-closure.
|
|
Folder Wrapped (FW)Each film is wrapped in a paper folder to prevent handling faults in the darkroom. The paper folders make it easy to store and protect the films after processing. Folder wrapped packaging is an ideal solution for boxes that, after opening, remain in use for a period of time in areas of high humidity and temperature, as the folder prevents the films from sticking together. Sheets of film are packed per 100 in a sealed bag and placed in a strong cardboard box.
|
|
Bulk Load Roll (BLR)BLR is packaging with bare film on a cardboard core. This film can be cut to any length and loaded with or without lead screens in reloadable cassettes in the darkroom. Available in a standard width of 70 mm and in lengths of 167.75 m (550 ft.) and 305 m (1,000 ft.).
|
Daylight Packaging
|
Pb VACUPACCompletely light-tight, airtight and moisture proof Pb VACUPAC is the perfect daylight packaging. The STRUCTURIX X-ray films with Pb screens have a standard thickness of 0.027 mm and are vacuum-packed in a completely light tight, airtight and moisture proof foil complex. The foil, a spin off from space technology, is a metallic polymer involving the deposition of vaporized aluminum under vacuum. The synthetic foil ensures that VACUPAC can be used under exteremly dirty and damp conditions. Pb VACUPAC is ideal for applications with energies higher than 100kV.
|
|
Pb ETE (Edge-To-Edge)Edge-to-edge Pb versions are available for sheet sizes that lack a VACUPAC version. A specific advantage of the edge-to-edge is its double-sided edge. This feature makes it possible to place the film against or between elements of a work piece easily and accurately. Opening the edge-to-edge packaging is as simple as tearing open the wrapper using the thread included for this purpose, then removing the film via the long side. The Pb edge-to-edge version is designed for exposure with energies higher than 100kV and isotopes.
|
|
DW ETE (Edge-To-Edge)This light-tight, moisture proof and greaseproof packaging without Pb screen is ideal for exposures using radiation energy lower than 100kV. The envelopes can be cut easily and taped for use with odd-shaped angles and corners. The envelopes are also easy to tape to the work piece.
|
|
Pb ROLLPACLight-tight, moisture proof and greaseproof. The film is sandwiched between two 0.027 mm lead screens. ROLLPAC packaging is completely light-tight. The packaging is resistant to moisture and grease. Our unique packaging ROLLPAC ensures that excellent contact between the film and lead foil is retained when the media is applied to spherical or tubular objects, even those with a small diameter. Because the screens are only used once, optimal results are guaranteed.
|
|
ROLLPAC PRECUTHighly Economical. Films in ROLLPAC packaging can be supplied in precut lengths from 70 cm by special order only. This exclusive form of packaging is ideal for pipeline projects, which generally consist of large serires of pipes of the same diameter. We can supply ROLLPAC precut in the length required for your proejct, saving you a considerable amount of time and money.
|
|
DW ROLLPACDW ROLLPAC packaging is specifically intended for material testing using low to very low radiation energy (<100 kV).
Widths up to 35 cm are available. |