Magnaflux > Mag Particle Inspection > MT Consumables

Fluorescent Magnetic Particles

​14A

14A is a highly sensitive fluorescent magnetic particle powder for locating very fine discontinuities in critical applications, can be mixed with oil or water

14AM

14AM is a highly sensitive oil-based magnetic particle suspension with 14A particles for locating very fine discontinuities in critical parts

20B

Fluorescent magnetic particle premix with 14A particles for locating fine discontinuities in high volume applications with water-based mag particle bath

14A Redi-Bath

Water-based fluorescent magnetic particle concentrate with 14A particles for locating very fine discontinuities in critical parts

14A Aqua-Glo

Water-based magnetic particle aerosol with 14A particles for locating very fine discontinuities in critical applications and difficult to reach areas

MG-410

Ultra-bright fluorescent magnetic particle powder for locating small, medium, and large discontinuities during wet fluorescent magnetic particle testing

MG-450A

Ultra-bright fluorescent mag particle premix for water-baths with MG-410 particles for locating small to gross discontinuities in high volume applications

Non-Fluorescent/Colored Magnetic Particles for Wet Method

7HF​

A highly-sensitive oil-based magnetic particle suspension aerosol for nonfluorescent wet mag particle testing to find fine and medium discontinuities
​

7C Black

A highly-sensitive non-fluorescent, colored magnetic particle powder for wet magnetic particle testing on finished and in-process parts

Non-Fluorescent/Colored Magnetic Particles for Dry Method

#1 Gray

Pale white-gray particles provide strong contrast on most metal surfaces, including high reflective surfaces during dry method mag particle testing
​

#8A Red

#8A Red magnetic powder provides strong contrast on most metal surfaces during dry method mag particle testing in visible light

#2 Yellow

Pale yellow particles provide strong contrast on light, medium and dark colored metal surfaces during dry magnetic particle testing
​

Suspension Vehicle

Carrier II

Petroleum suspension vehicle for wet mag particle testing provides excellent particle mobility, good suspension stability and enhanced corrosion protection
​

White Contrast Paint

WCP-2

White contrast paint provides a high contrast background to improve probability of detection and sensitivity during visible magnetic particle inspections
​

Water Conditioners & Additives

WA-2B

General-purpose water-conditioning powder improves surface wetting and magnetic particle dispersion stability in water-based magnetic particle suspensions
​

ZAF-2

General-purpose, silicone-free defoamer stops foaming in water-based mag particle baths, aqueous developer baths, hydrophilic remover baths and more

AX-52

Water-soluble corrosion inhibitor for water-based magnetic particle suspensions protects parts and magnetic equipment from rusting
​