Model 300 60-Minute Darkroom Timer (GRA300)Reliable and accurate 60-minute timer. Can be set in minutes for four-color developing and seconds for enlarger control.
Minutes and seconds can easily be read across the room in total darkness, making the Model 300 timer ideal for film processing, especially the precise timing required by color processing. The 60-minute time range can be set in minutes for developing and seconds for enlarger control. Two hands permit quick setting by seconds, minutes or combinations of seconds and minutes. An exclusive dual-cam mechanism provides extreme accuracy for long time intervals: +/-.015% at maximum dial setting. Two separate outlet receptacles control an enlarger or printer and safelight by a combination time/focus switch. Each outlet has a 600 watts rated capacity for operating most film processing equipment. The Model 300 can be used with a relay for heavier loads. The case is made of durable plastic and measures 7 1/2" x 7 1/2" x 2 1/2". It is exceptionally strong, withstands high impact, resists chemicals and moisture, and is electrically non-conductive. The case has a recessed handle in the back and keyholes for wall mounting. Model 300 features:
Specifications Minimum Setting: 1 second Total Range: 60 minutes, by minutes and seconds Automatic Buzzer: Constant tone Accuracy: +/-.015% @ maximum setting Voltages: Input voltage 100-130 VAC, 50 or 60 Hz: 210-250 VAC, 50 Hz AC Outlet Power Rating: @120 VAC Max Lamp Load: 600W Max Resistive Load: 1200W Max Motor Load: 1/3 HP Item # - GRA300 |